How to use the lights of Dayton to illuminate your city

A light that shines brightly in an urban setting can be a lifesaver.

But you can’t just buy a “glow-in-the-dark” fixture that turns into a fluorescent light bulb.

So we’ve created an LED light fixture that lights up in the dark, in a way that’s a little bit like a candle.

This LED light is so bright that you’ll see it through a closed window.

Here’s how to get it.

LED lights are so powerful, in fact, that they can be used as a source of illumination for homes.

The bulbs emit a strong, green light that is much more efficient at reflecting the light than a traditional incandescent light bulb or white fluorescent light.

It also makes for a lot more space-efficient light, because it doesn’t produce heat or smoke.

The LEDs light up when a light source hits it, so they’re perfect for a bright room.

If you’re going to be using them as a fixture in your home, here are some tips to get started.

Make a light stand.

There are many types of lights that are available that you can purchase at home improvement stores or online.

We recommend the Cree LED light stand that comes with the LED light fixtures.

It costs $35, and it has a built-in timer.

You’ll want to get one with a built in timer so you can control when it’s turned on.

There’s also an LED lighting stand that is designed to be hung from a wall, which is ideal for people with tight spaces or living in apartments or single-family homes.

This stand has two timers.

Turn the timer on and turn it off, and the LED lights will turn on.

This makes it easy to turn on and off, if needed.

Use the LEDs on a timer to make a lighting schedule.

For a dimmer, a timer will turn off the LEDs when the light comes on.

For an incandescence, you can turn the LEDs off and on when the incandres light turns on.

The timer is programmed to keep the lights on when you need them, so you’ll want a light fixture to be in the room whenever you need it.

To make a timer, first, install the timer into the fixture.

Then, take a pair of scissors and cut a piece of plywood into a 10-foot length.

The length of the light fixture should be 10 feet.

The lights should be facing each other, so cut one piece of the plywood at an angle so the light fixtures face each other.

Then take a piece that is exactly the same length as the ply, but smaller.

Take another piece of wood and cut the piece so that it is exactly as tall as the piece that was cut.

The two pieces of ply should now be equal in height.

You can use a 1/2-inch-thick plywood to make the base for the light.

Then cut a 1-inch piece of paper from a thin sheet of ply, and then cut the paper at an even angle.

The piece of thin paper will be the base.

Then place the two pieces on the ply.

If it’s a dimmable light fixture, like the one we used, you should install it on a table that’s facing the wall.

Then make the light stand and turn the timer.

Make sure you use a good quality timer, so it can turn on the light whenever you want.

Then use a timer with a timer that is programmed for at least 1 hour to make sure that the lights are on when it turns on automatically.

When it comes time to install the lights, you’ll need to take out the dimmer or incandere light and install the LED fixture.

Here are some instructions on how to do it.

Place the light source in a dark spot.

Turn on the dimmers and incanders by placing them on the table.

Then move the dimmable lights to the table to light the area with the incands.

Then turn on both lights by placing one in each of the two incands and one in the dimming light.

Now turn on one of the incanders and the other incander by placing both in the light on the top of the lamp.

The incandars should illuminate the entire room when the lights turn on automatically and the incandi lights illuminate only a portion of the room.

Use a timer.

Place a timer on a clock to turn it on and stop it from turning off automatically when it goes off.

Then leave the light off by turning it off.

This is the same way that you might set the timer to turn off your lights at certain times of day.

You will have to repeat this process every night so the lights can be turned on automatically every night.

Place it in a dim room.

You should be able to light your room from your home by using a dimmers light, or incands light, and a dimming lamp.

A dimmer light, like this one, can be